Laundry · Electricity cost calculator
How much does Heat pump dryer cost to run?
Calculate the approximate electricity cost of a modern heat pump tumble dryer.
Example calculation
Typical values for Heat pump dryer
These values are a useful starting point for the calculator, but they are not guaranteed consumption figures for your specific model.
Consumption/use
0.9 kWh
Uses/week
3
Example/year
€49.14
About the data
Typical value for a modern heat pump dryer. Older condenser or vented dryers can use considerably more electricity.
Example using €0.35/kWh. This works out to approximately €0.32 per use, €4.10 per month and 140.4 kWh per year.
Your values
Heat pump dryer electricity cost calculator
Adjust the suggested values to match your own device, electricity tariff and actual usage.
TinyTools uses typical values that you can adjust to match your usage.
Typical value – adjust it if you know a more accurate figure for your device or program.
You can find your electricity price on your electricity bill.
Decimal values are also possible, for example 0.5 for roughly every second week.
Heat pump dryer costs you
EstimatePer use
€0.32
Per week
€0.95
Per month
€4.10
Consumption/year
140.4 kWh
💡 Energy-saving tip
Spin laundry thoroughly beforehand and dry suitably full loads where possible.
The calculation uses an adjustable typical value for electricity consumption per use. Actual consumption may vary depending on the device, program and usage.
💬 Did TinyTools help you?
Is a device missing, was something unclear or do you have an idea for improving TinyTools? A short message helps us a lot.
Send feedback →The button opens your email application. TinyTools does not store any data and continues to use no tracking.
Understand the calculation
How does TinyTools calculate electricity costs?
For this device, a consumption value per use is more useful than a simple calculation based on watts and runtime.
TinyTools therefore multiplies consumption per use by your electricity price and usage frequency.
If your energy label states a value per 100 cycles, divide it by 100 and enter the result in TinyTools as consumption per use.
💡 Energy-saving tip for Heat pump dryer
Spin laundry thoroughly beforehand and dry suitably full loads where possible.
Want a more accurate result?
Use the calculator mode “Your own values” and enter your own measured consumption in kWh per use.
Want to check another device?
You'll find more electricity cost calculators in our device library.